FRATELLI MARIANI INDUSTRIAL SOLUTIONS

z
Home / marianitech® industrial solutions / Industrial Wire Cloth / WOVEN TYPES of wire mesh

WOVEN TYPES of wire mesh

woven-net

All woven types of wire mesh are produced in accordance with ISO 4783/3

We offer 6 Woven types of Wire Mesh:
– Type A: Woven net
– Type B: Crimped – Single Intermediate Crimp
– Type C: Crimped – Double Intermediate Crimp
– Type D: Flat stamped – Lock crimped
– Type E: Flat stamped – Flat top crimped
– Type F: Welded – Pressure welded

Woven wire cloth brochure  5,41 MB (48 pages)

Products

Type A: Woven net Wire mesh

Wire cloths are produced by weaving weft and warp metal wires. Continuous wires are used that are not previously crimped or shaped. Many types of weaving patterns can be produced based on the application. It can be woven, twill, herringbone, cloths with a square or rectangular mesh or based on specific drawings, where the alternation of weft and warp wires and their thickness creates countless possibilities. They can be produced with different heights up to a maximum of three meters, in rolls or panels with the requested measurements.

Mesh openingWire diameterOpen areaApprox. Weight Stainles steelType A: Woven net Wire mesh
[mm][mm][%][kg/mq]
8×82×2645
8×81,5×1,5713
6×62×2566.3
6×61,5×1,5643.8
5×52×2517.1
5×51,5×1,5594.3
4×42×2448.3
4×41,5×1,5535.1
3×32×23610
3×31,5×1,5446.3
3×31,2×1,2514.3
2,5×2,51,5×1,5397
2×21,5×1,5338
1,5×1,51×1365
1×11×1256.3
Type B: Crimped Single Intermediate Crimp

Crimped with a single intermediate crimp These are produced by weaving drawn wires that are previously crimped by cogwheels that precisely bend the wire. They are called plain mesh when if one weft wire and one warp wire pass through each crimp, whereas they are called intermediate crimp mesh if the wires are interlaced every one, two or multiple crimps. They can be manufactured with square or rectangular meshes depending on the distance between the wires in the two directions and it is possible to use wires with two different types of crimping between the weft and warp wire.

Mesh openingWire diameterOpen areaApprox. Weight Stainles steelType B: Crimped Single Intermediate Crimp
[mm][mm][%][kg/mq]
100 × 1005 × 5912.88
80 × 805 × 5894.67
60 × 605 × 5855.43
50 × 505 × 5836.49
40 × 404 × 4835.1
30 × 303 × 3833.97
20 × 203 × 3765.95
20 × 202 × 2832.62
15 × 152 × 2783.5
10 × 102 × 2695.2
10 × 101,5 × 1,5762.92
Type C: Crimped Double Intermediate Crimp
Mesh openingWire diameterOpen areaApprox. Weight Stainles steelType C: Crimped Double Intermediate Crimp
[mm][mm][%][kg/mq]
100 × 1005 × 5912.88
80 × 805 × 5894.67
60 × 605 × 5855.43
50 × 505 × 5836.49
40 × 404 × 4835.1
30 × 303 × 3833.97
20 × 203 × 3765.95
20 × 202 × 2832.62
15 × 152 × 2783.5
10 × 102 × 2695.2
10 × 101,5 × 1,5762.92
Type D: Flat stamped Lock crimped
Type E: Flat stamped Flat top crimped
Type F: Electrowelded mesh Pressure welded

The electrowelded mesh is produced using orthogonal straight wires in the warp and weft direction, overlapped and electro spot welded. Usually produced with square mesh and the ratio between the wire diameter and the mesh change based on the wire mesh. With the same number of mesh, the wire diameter is usually smaller, while still providing good resistance due to the welding procedure. They are supplied in 25 to 50 m rolls with a height of 1000mm, or upon request in panels made to measure.

MaterialPitch [mm]Mesh CountWire diameter [mm]Approx. Weight [kg/mq]Type F: Welded Pressure welded
Stainless steel AISI 30450 × 502 inch2 × 21
Stainless steel AISI 30425,4 × 25,41 inch1,47 × 1,471.2
Stainless steel AISI 30416 × 163/5 inch1 × 10.98
Stainless steel AISI 30412,7 × 12,71/2 inch1,24 × 1,241.7
Stainless steel AISI 30412,7 × 12,71/2 inch0,71 × 0,710.6
Stainless steel AISI 30411 × 112/5 inch1 × 11.5
Stainless steel AISI 3048,46 × 8,461/3 inch1 × 11.13
Stainless steel AISI 3046,35 × 6,351/4 inch0,63 × 0,630.7
Galvanized50,8 × 50,82 inch2,05 × 2,051.09
Galvanized25,4 × 25,41 inch1,7 × 1,71.2
Galvanized19 × 193/4 inch1,4 × 1,41.5
Galvanized16 × 16cca. 3/5 inch1,2 × 1,21.18
Galvanized12,7 × 12,71/2 inch1 × 11.7
Galvanized10,6 × 10,6cca. 2/5 inch0,9 × 0,91.1
Galvanized8 × 81/3 inch0,8 × 0,80.12
Galvanized6,3 × 6,31/4 inch0,55 × 0,550.76
Galvanized5,3 × 5,31/5 inch0,7 × 0,70.4

Legend

L: Mesh Opening in mm
D: Wire diameter in mm